Peace of Mind Checklist — Cubby 2
Use the checklist below to confirm safe installation at delivery and setup. If you’d prefer something you can mark off as you go, download the printable checklist at the bottom of the page.
⚠️
Frame Install
- All five bed supports (leveling feet, 8" legs + leveling feet, or caster wheels) are securely installed.
⚠️
Canopy Installation
- Mattress (full-size, 54" × 75", 8–10" thick) is correctly centered and seated between the frame slats and side rails.
- All canopy top, side, and corner sleeves are buckled and completely zipped around the frame.
- On the Canopy skirt, the top seam of the velcro is affixed with the top of bed rail with tension that is taut, but not tearing the canopy.
⚠️
Safety Features
- Safety Sheet is zipped around the entire inner canopy with no red safety indicators visible.
- Safety Sheet zipper is fully zipped to the end of the track, not visible to the user inside the bed and ending in the middle of the safety sheet zipper guard and locked.
- Fabric Hole Cover is zipped closed and locked in place (if no Hub is installed).
⚠️
Final Safety + Function Check
- Frame is stable, with no wobbling or misaligned parts; all connections and screws checked.
- All seams, zippers, mesh, and attachments on the Canopy and Safety Sheet are undamaged and intact.
- Cubby Bed User Manual and additional hardware is provided to the customer.
Checklist complete? Register the warranty.
Service lifetime details available on the warranty page.
Register + View Warranty →CubbyBeds.com/Warranty
Questions? Visit the DME Supplier Portal